-
SMA M RA LMR 400 CRIMP
Original price was: ₹216.00.₹184.00Current price is: ₹184.00.Add to cartThis SMA male right-angle connector is designed for crimping onto LMR 400 cables. It ensures a secure and stable connection for high-frequency signal transmission, suitable for RF applications with space constraints.
-
DIN F 1/2″ LDF CLAMP
Original price was: ₹280.00.₹232.00Current price is: ₹232.00.Add to cartImpedance – 50Ω, Frequency – 6.5Ghz, VSWR – 1.15:1 (Max), Dielectric Resistance – ≥5000MΩ,country of origin-Made in India, packaging Type- Box, Colour-Silver, Usage- Connector Cable and Microwave Parts..
-
Flat Omni Antenna 3dBi
Original price was: ₹288.00.₹240.00Current price is: ₹240.00. -
SMA M LMR 100 CRIMP
Original price was: ₹32.00.₹25.60Current price is: ₹25.60.Add to cartThis SMA male connector is designed for crimping onto LMR 100 cables. It ensures a secure and stable connection for high-frequency signal transmission, ideal for telecommunications and other professional RF applications.
-
BNC(F) TO SMA(M) ADAPTOR 3GHZ
Original price was: ₹200.00.₹160.00Current price is: ₹160.00.Add to cart| BNC(F) TO SMA(M) ADAPTOR 3GHZ | The BNC(F) to SMA(M) adaptor is designed for RF and signal transmission applications, supporting frequencies up to 3GHz. It features a BNC female connector on one end and an SMA male connector on the other, allowing for easy interfacing between different connector types. This adaptor is ideal for use in telecommunications, broadcast systems, and test equipment, providing reliable signal transfer with minimal insertion loss. Its durable construction ensures long-term performance in both laboratory and field environments. |
-
SMA M LMR 200 CRIMP
Original price was: ₹56.00.₹40.00Current price is: ₹40.00.Add to cartThis SMA male connector is designed for crimping onto LMR 200 cables. It provides a secure and stable connection for high-frequency signals, suitable for RF applications requiring reliable performance.
-
Cold Shrink Tube for AISG/Jumper Cables
Original price was: ₹216.00.₹176.00Current price is: ₹176.00.Add to cartThe Cold Shrink Tube by RF CONNECTOR HOUSE is made from high-quality silicon rubber, offering superior insulation and protection for cables. With a 2:1 shrink ratio, it provides a secure fit around cables without the need for heat during installation. Rated for 220V and capable of withstanding temperatures from -55°C to +120°C, this tube offers durable protection against environmental factors like moisture, dust, and abrasion. Customizable in diameter, length, and thickness, it is ideal for cable repairs, insulation protection, and electrical applications in industrial, commercial, and residential environments.
-
Rubber mastic Tape
Original price was: ₹240.00.₹200.00Current price is: ₹200.00.Add to cartThe Rubber Mastic Tape by RF CONNECTOR HOUSE is a high-performance, double-sided waterproof tape designed for sealing and insulating electronic components. Featuring a pressure-sensitive hot melt adhesive, it delivers strong bonding to steel, PVC, and other surfaces. With exceptional tensile strength (2400 psi), elongation (500%), and tear resistance (200 pli), this tape is flame-retardant and withstands high temperatures, ensuring reliable performance in harsh environments. Ideal for industrial and electrical applications, it provides superior protection against water, dust, and mechanical stress. Customizable in thickness and dimensions, this versatile tape meets diverse insulation and sealing needs.
-
3 dBi WIFI internal antenna 2.4/5.8 GHz with 10 cm cable
Original price was: ₹80.00.₹40.00Current price is: ₹40.00.Add to cartThe 3 dBi WiFi Internal Antenna with a 10 cm cable is designed for 2.4/5.8 GHz wireless applications, providing reliable and strong connectivity for devices such as routers, IoT systems, smart home devices, and wireless access points. With a 3 dBi gain, it ensures improved signal strength and extended coverage for seamless performance. The compact design, combined with a 10 cm cable, makes it ideal for integration into space-constrained devices. This antenna is perfect for enhancing WiFi communication in a wide range of applications, including consumer electronics, industrial systems, and IoT networks, offering reliable and stable wireless connectivity.
-
3dBi internal WIFI Antenna 2.4/5.8GHz
Original price was: ₹96.00.₹56.00Current price is: ₹56.00. -
3 dBi PCB Antenna 2.4 GHz
Original price was: ₹80.00.₹40.00Current price is: ₹40.00.Add to cartThe 3 dBi PCB Antenna is designed for 2.4 GHz applications, offering reliable performance for IoT, wireless connectivity, GPS, and navigation systems. Ideal for remote control, automation, and wireless medical devices, it ensures stable signal transmission and reception. Its compact PCB design is perfect for space-constrained applications, while its high efficiency enhances device connectivity. This antenna is an excellent choice for modern wireless technologies, ensuring optimal performance across diverse applications.
-
ATU-130 MAX Radio Automatic Antenna Tuner
Original price was: ₹20,000.00.₹15,200.00Current price is: ₹15,200.00.Add to cartThe ATU-130 MAX is an automatic antenna tuner designed for HF radios, providing efficient impedance matching across a frequency range of 1.6 to 30 MHz. Capable of handling up to 125 watts, it ensures optimal signal transmission and reception. Its fast tuning response and memory function allow for quick adjustments, improving communication quality. The unit is housed in a rugged, weatherproof enclosure, making it suitable for outdoor use. Compact and reliable, the ATU-130 MAX easily integrates with various antenna types, making it ideal for both mobile and base station setups.
-
Flat Omni Antenna 3dBi
Original price was: ₹288.00.₹240.00Current price is: ₹240.00. -
LPDA antenna 12dBi 698-2700MHz
Original price was: ₹1,600.00.₹1,280.00Current price is: ₹1,280.00.Add to cartFrequency – 698 – 960 / 1710 – 2700 MHz, Gain- 10~12dbi, VSWR- ≤ 2.0, Polarization- Vertical, Material- plastic, Storage- Channel 10kM…..
-
Magnetic Base Antenna 6dBi 800-2500Mhz 3 Mtr
Original price was: ₹416.00.₹376.00Current price is: ₹376.00.Add to cartMagnetic Base Antenna 6dBi 800-2500Mhz 3 Mtr | The Magnetic Base Antenna 6dBi 800-2500MHz with 3 Mtr Cable is a high-performance antenna designed for enhancing signal reception across GSM, CDMA, and LTE networks. With a 6dBi gain, it offers significant improvements in connectivity. The magnetic base allows for easy installation on metal surfaces, while the 3-meter cable provides flexibility in positioning the antenna for optimal performance. Ideal for mobile communication, IoT systems, and other applications, this antenna ensures stable and efficient wireless communication in areas with weak signals. |
-
MIMO ANTENNA PATCH 7/9DBI 698-2700Mhz
Original price was: ₹2,400.00.₹1,920.00Current price is: ₹1,920.00.Add to cartThe MIMO antenna patch with 7/9 dBi gain operates within the frequency range of 698-2700 MHz, making it suitable for a wide range of applications including cellular networks, LTE, 4G, and potentially 5G frequencies.
Frequency Range: 698-2700 MHz
Gain: 7 dBi (on lower frequencies) / 9 dBi (on higher frequencies)
Type: MIMO (Multiple Input, Multiple Output) Antenna -
N M RA LMR 400 CRIMP
Original price was: ₹152.00.₹128.00Current price is: ₹128.00.Add to cart| N M RA LMR 400 CRIMP | A crimp connector for LMR 400 cables with RA design, ensuring a strong and dependable electrical connection, crucial for maintaining performance. |
-
Omni Antenna 5G 3DBI 800-2500Mhz
Original price was: ₹560.00.₹400.00Current price is: ₹400.00.Add to cartFrequency – 800 – 2500Mhz Polarization – Vertical VSWR – ?1.8 Gain – 3dbi, MateriaL- Metal, Color- White, Size-8-10ft, Feature- Waterproof, Mounting Type- Wall Mounted……
UHF F LMR 100 CRIMP
Original price was: ₹96.00.₹80.00Current price is: ₹80.00.
| UHF F LMR 100 CRIMP | The UHF Female LMR 100 Crimp connector is designed for use with LMR 100 cables, offering a secure and reliable connection. The crimp termination provides a fast and robust attachment, ensuring minimal signal loss and maximum efficiency in RF applications. This connector is ideal for low-power applications and is commonly used in radio communication systems, antennas, and other RF devices. Its durable construction and precise engineering make it suitable for use in challenging environments, providing long-lasting performance and optimal signal integrity. |
### Tools and Materials Needed:
1. **UHF Female Connector (PL-259)**
2. **LMR 100 Coaxial Cable**
3. **Crimping Tool** (suitable for UHF connectors)
4. **Cable Stripping Tool**
5. **Coaxial Cable Preparation Tool** (optional, for precision)
6. **Heat Shrink Tubing** (optional, for additional insulation and strain relief)
### Steps to Crimp a UHF Female Connector onto LMR 100 Cable:
1. **Prepare the Cable**:
– **Strip the Outer Jacket**: Use the cable stripping tool to remove approximately 1 to 1.5 inches of the outer jacket from the LMR 100 cable. Be cautious not to damage the underlying braided shield.
– **Expose the Shielding**: Pull back the braided shield to reveal the dielectric insulation. Trim any excess shielding to ensure a proper fit inside the connector.
– **Strip the Dielectric**: Strip the dielectric insulation to expose the center conductor. The exposed length of the center conductor should be around 1/4 to 1/2 inch.
2. **Prepare the Connector**:
– **Slide on the Ferrule**: If the UHF female connector includes a ferrule (a metal sleeve that will be crimped onto the shield), slide it onto the cable before inserting the cable into the connector.
– **Insert the Cable**: Insert the prepared end of the LMR 100 cable into the UHF female connector. Ensure that the center conductor aligns with the center pin of the connector and the shield fits against the ferrule.
3. **Crimp the Connector**:
– **Crimp the Ferrule**: Use the crimping tool to crimp the ferrule onto the braided shield of the cable. Ensure the crimp is tight and secure, making a solid connection between the shield and the connector.
– **Crimp the Center Pin**: Use the crimping tool to crimp the center pin of the UHF female connector onto the center conductor of the cable. Ensure the center conductor is properly inserted into the pin before crimping.
4. **Assemble and Insulate** (Optional):
– **Check the Fit**: Ensure the connector is firmly attached and that there are no loose parts. The center pin should be well-aligned, and the shield should be securely crimped.
– **Apply Heat Shrink Tubing** (Optional): For additional insulation and strain relief, slide heat shrink tubing over the joint and apply heat to shrink it tightly around the connector and cable.
5. **Inspect the Assembly**:
– **Verify Connections**: Check the crimped areas to ensure they are clean and well-formed. Make sure the center conductor and shield are properly connected.
– **Test the Connection**: Optionally, test the assembled connector with appropriate equipment to ensure it’s functioning correctly and there are no issues with signal transmission.
| Brand | RF CONNECTOR HOUSE |
|---|---|
| Material | Brass |
| Characteristic Impedance | 50Ω |
| Frequency Range | DC- 3 GHz |
| VSWR | ≤ 1.15@(0~3GHz) |
| Dielectric strength | ≥2000V RMS, at sea level |
| Dielectric Resistance | ≥ 5000 M Ω |
| Insertion Loss | ≤ 0.08dB (@2200MHz) |
| Temperature Range | – 40°C – +85 °C |
Related products
-
UHF M LMR 400 CLAMP
Original price was: ₹152.00.₹128.00Current price is: ₹128.00.Add to cart| UHF M LMR 400 CLAMP | The UHF Male LMR 400 Clamp connector is tailored for LMR 400 cables, offering low signal loss and excellent performance. The clamp termination ensures a secure and stable connection, suitable for high-power RF applications. This connector is commonly used in radio communication systems, antennas, and other RF devices where high performance is crucial. Its robust design and precise engineering provide durability and optimal signal transmission, making it ideal for professional installations in challenging environments. |
-
UHF F 2 HOLE SOLDER
Original price was: ₹96.00.₹80.00Current price is: ₹80.00.Add to cart| UHF F 2 HOLE SOLDER | The UHF Female 2 Hole Solder connector is crafted for secure and stable connections in RF systems. It features a two-hole flange design for easy mounting on panels or equipment, ensuring a robust and permanent installation. The solder termination method offers reliable electrical contact and is suitable for high-frequency signal transmission. This connector is ideal for applications requiring a sturdy connection, such as broadcasting and radio communication equipment. Its durable construction and reliable performance make it a preferred choice for professional installations in demanding environments. |
-
UHF F RA LMR 200 CRIMP
Original price was: ₹208.00.₹176.00Current price is: ₹176.00.Add to cart| UHF F RA LMR 200 CRIMP | The UHF Female Right Angle LMR 200 Crimp connector is designed for applications requiring a 90-degree cable exit. This configuration allows for flexible installation in tight spaces without compromising performance. It is suitable for LMR 200 cables, offering low loss and excellent signal integrity. The crimp termination provides a secure and efficient connection, ideal for wireless communication systems, antennas, and other RF devices. Its durable construction ensures long-lasting performance, making it a preferred choice in space-constrained installations. |
-
UHF F LMR 400 CRIMP
Original price was: ₹96.00.₹80.00Current price is: ₹80.00.Add to cart| UHF F LMR 400 CRIMP | The UHF Female LMR 400 Crimp connector is tailored for LMR 400 cables, offering low signal loss and excellent performance. The crimp termination ensures a secure and reliable connection, suitable for high-power RF applications. This connector is commonly used in radio communication systems, antennas, and other RF devices where high performance is crucial. Its robust design and precise engineering provide durability and optimal signal transmission, making it ideal for professional installations in challenging environments. |
-
UHF M LMR 100 CRIMP
Original price was: ₹96.00.₹80.00Current price is: ₹80.00.Add to cart| UHF M LMR 100 CRIMP | The UHF Male LMR 100 Crimp connector is crafted for LMR 100 cables, providing a secure and efficient connection. The crimp termination ensures minimal signal loss, making it suitable for low-power RF applications. This connector is commonly used in radio communication systems, antennas, and other RF devices. Its compact design and reliable performance make it ideal for installations where space is limited but high-quality signal transmission is required. The durable construction ensures long-lasting performance in various environments. |
-
MINI UHF M LMR 200 CRIMP
Original price was: ₹104.00.₹88.00Current price is: ₹88.00.Add to cart| MINI UHF M LMR 200 CRIMP | The Mini UHF Male LMR 200 Crimp connector is designed for applications requiring compact size and reliable performance. It features a crimp termination for secure and efficient cable attachment. This connector supports LMR 200 cables, offering low loss and flexibility, making it ideal for various RF applications. Its robust construction ensures durability, while the precise design guarantees optimal signal integrity. Suitable for use in wireless communication systems, the Mini UHF connector provides excellent connectivity and is widely used in installations where space is limited but high performance is necessary. |
-
UHF F 4 HOLE SOLDER
Original price was: ₹112.00.₹96.00Current price is: ₹96.00.Add to cart| UHF F 4 HOLE SOLDER | The UHF Female 4 Hole Solder connector is engineered for reliable and strong connections in radio frequency systems. With a four-hole flange design, it allows secure panel or equipment mounting, providing a stable installation. The solder termination ensures excellent electrical contact, making it suitable for high-frequency applications. This connector is widely used in radio, television, and telecommunications equipment where a permanent and durable connection is essential. Its robust design and reliable performance make it a valuable component in professional RF installations. |
-
UHF M LMR 400 SOLDER
Original price was: ₹152.00.₹128.00Current price is: ₹128.00.Add to cart| UHF M LMR 400 SOLDER | The UHF Male LMR 400 Solder connector is designed for use with LMR 400 cables, providing a reliable and durable connection. The solder termination ensures excellent electrical contact and minimal signal loss, suitable for high-power RF applications. This connector is commonly used in broadcasting, telecommunications, and other RF systems where superior performance is required. Its robust construction and precise engineering provide long-lasting reliability, making it ideal for professional installations in challenging environments. |
-
UHF M RG 217 SOLDER
Original price was: ₹344.00.₹288.00Current price is: ₹288.00.Add to cart| UHF M RG 217 SOLDER | The UHF Male RG 217 Solder connector is crafted for use with RG 217 cables, providing a reliable and secure connection. The solder termination ensures excellent electrical contact and minimal signal loss, making it suitable for high-frequency RF applications. This connector is widely used in radio communication systems, antennas, and other RF devices where durability and performance are critical. Its robust design and precise engineering provide long-lasting reliability, making it ideal for installations where optimal signal transmission is required. |
-
UHF M RA LMR 200 CRIMP
Original price was: ₹112.00.₹96.00Current price is: ₹96.00.Add to cart| UHF M RA LMR 200 CRIMP | The UHF Male Right Angle LMR 200 Crimp connector is designed for applications requiring a 90-degree cable exit. This configuration allows for flexible installation in tight spaces without compromising performance. It is suitable for LMR 200 cables, offering low loss and excellent signal integrity. The crimp termination provides a secure and efficient connection, ideal for wireless communication systems, antennas, and other RF devices. Its durable construction ensures long-lasting performance, making it a preferred choice in space-constrained installations. |
-
UHF M LMR 200 CRIMP
Original price was: ₹88.00.₹72.00Current price is: ₹72.00.Add to cart| UHF M LMR 200 CRIMP | The UHF Male LMR 200 Crimp connector is specifically designed for LMR 200 cables, known for their low loss and flexibility. Featuring a crimp termination, this connector ensures a secure and efficient connection for various RF applications. Its sturdy construction provides durability and reliability, making it suitable for wireless communication systems, antennas, and other RF devices. The connector’s design optimizes signal transmission and minimizes interference, ensuring high-quality performance in demanding environments. |
-
UHF F LMR 200 CRIMP
Original price was: ₹96.00.₹80.00Current price is: ₹80.00.Add to cart| UHF F LMR 200 CRIMP | The UHF Female LMR 200 Crimp connector is specifically designed to accommodate LMR 200 cables, known for their low loss and flexibility. Featuring a crimp termination, this connector ensures a secure and efficient connection for various RF applications. Its sturdy construction provides durability and reliability, making it suitable for wireless communication systems, antennas, and other RF devices. The connector’s design optimizes signal transmission and minimizes interference, ensuring high-quality performance in demanding environments. |
-
UHF M LMR 400 CRIMP
Original price was: ₹96.00.₹80.00Current price is: ₹80.00.Add to cart| UHF M LMR 400 CRIMP | The UHF Male LMR 400 Crimp connector is engineered for LMR 400 cables, offering a reliable and secure connection. The crimp termination ensures minimal signal loss, making it suitable for high-power RF applications. This connector is widely used in broadcasting, telecommunications, and other RF systems requiring superior performance. Its durable construction and precise engineering provide long-lasting reliability, making it ideal for installations where signal integrity is critical. The connector supports efficient cable attachment and optimal signal transmission. |
-
UHF M 1/2″ LDF CLAMP
Original price was: ₹296.00.₹248.00Current price is: ₹248.00.Add to cart| UHF M 1/2″ LDF CLAMP | The UHF Male 1/2″ LDF Clamp connector is designed for use with 1/2″ LDF cables, providing a secure and stable connection. The clamp termination method offers a strong grip on the cable, ensuring minimal signal loss and reliable performance. This connector is ideal for high-power RF applications, such as broadcasting and telecommunications, where durability and stability are essential. Its robust design and precise construction make it suitable for use in demanding environments, providing consistent performance and optimal signal transmission. |
Reviews
There are no reviews yet.