-
SMA M RA LMR 400 CRIMP
Original price was: ₹216.00.₹184.00Current price is: ₹184.00.Add to cartThis SMA male right-angle connector is designed for crimping onto LMR 400 cables. It ensures a secure and stable connection for high-frequency signal transmission, suitable for RF applications with space constraints.
-
DIN F 1/2″ LDF CLAMP
Original price was: ₹280.00.₹232.00Current price is: ₹232.00.Add to cartImpedance – 50Ω, Frequency – 6.5Ghz, VSWR – 1.15:1 (Max), Dielectric Resistance – ≥5000MΩ,country of origin-Made in India, packaging Type- Box, Colour-Silver, Usage- Connector Cable and Microwave Parts..
-
Flat Omni Antenna 3dBi
Original price was: ₹288.00.₹240.00Current price is: ₹240.00. -
SMA M LMR 100 CRIMP
Original price was: ₹32.00.₹25.60Current price is: ₹25.60.Add to cartThis SMA male connector is designed for crimping onto LMR 100 cables. It ensures a secure and stable connection for high-frequency signal transmission, ideal for telecommunications and other professional RF applications.
-
DIN F 1/2″ SF CLAMP
Original price was: ₹280.00.₹232.00Current price is: ₹232.00.Add to cartImpedance – 50?, Frequency – 6.5Ghz, VSWR – 1.15:1 (Max), Dielectric Resistance – ?5000M?,country of origin-Made in India, packaging Type- Box, Colour-Silver, Usage- Connector Cable and Microwave Parts..
-
RG 174 CABLE
Original price was: ₹32.00.₹24.00Current price is: ₹24.00.Add to cart| RG 174 Cable | RG 174 Cable is a thin, flexible coaxial cable widely used in low-power, high-frequency applications. Its small diameter makes it ideal for use in tight spaces, such as in mobile communications, GPS systems, and other compact electronic devices. The cable’s construction includes a stranded conductor, which enhances flexibility, and a braided shield that provides adequate protection against signal interference. RG 174 is also used in data transmission, wireless networking, and other applications where lightweight and flexibility are required. |
-
Cold Shrink Tube for AISG/Jumper Cables
Original price was: ₹216.00.₹176.00Current price is: ₹176.00.Add to cartThe Cold Shrink Tube by RF CONNECTOR HOUSE is made from high-quality silicon rubber, offering superior insulation and protection for cables. With a 2:1 shrink ratio, it provides a secure fit around cables without the need for heat during installation. Rated for 220V and capable of withstanding temperatures from -55°C to +120°C, this tube offers durable protection against environmental factors like moisture, dust, and abrasion. Customizable in diameter, length, and thickness, it is ideal for cable repairs, insulation protection, and electrical applications in industrial, commercial, and residential environments.
-
Rubber mastic Tape
Original price was: ₹240.00.₹200.00Current price is: ₹200.00.Add to cartThe Rubber Mastic Tape by RF CONNECTOR HOUSE is a high-performance, double-sided waterproof tape designed for sealing and insulating electronic components. Featuring a pressure-sensitive hot melt adhesive, it delivers strong bonding to steel, PVC, and other surfaces. With exceptional tensile strength (2400 psi), elongation (500%), and tear resistance (200 pli), this tape is flame-retardant and withstands high temperatures, ensuring reliable performance in harsh environments. Ideal for industrial and electrical applications, it provides superior protection against water, dust, and mechanical stress. Customizable in thickness and dimensions, this versatile tape meets diverse insulation and sealing needs.
-
3 dBi WIFI internal antenna 2.4/5.8 GHz with 10 cm cable
Original price was: ₹80.00.₹40.00Current price is: ₹40.00.Add to cartThe 3 dBi WiFi Internal Antenna with a 10 cm cable is designed for 2.4/5.8 GHz wireless applications, providing reliable and strong connectivity for devices such as routers, IoT systems, smart home devices, and wireless access points. With a 3 dBi gain, it ensures improved signal strength and extended coverage for seamless performance. The compact design, combined with a 10 cm cable, makes it ideal for integration into space-constrained devices. This antenna is perfect for enhancing WiFi communication in a wide range of applications, including consumer electronics, industrial systems, and IoT networks, offering reliable and stable wireless connectivity.
-
3dBi internal WIFI Antenna 2.4/5.8GHz
Original price was: ₹96.00.₹56.00Current price is: ₹56.00. -
3 dBi PCB Antenna 2.4 GHz
Original price was: ₹80.00.₹40.00Current price is: ₹40.00.Add to cartThe 3 dBi PCB Antenna is designed for 2.4 GHz applications, offering reliable performance for IoT, wireless connectivity, GPS, and navigation systems. Ideal for remote control, automation, and wireless medical devices, it ensures stable signal transmission and reception. Its compact PCB design is perfect for space-constrained applications, while its high efficiency enhances device connectivity. This antenna is an excellent choice for modern wireless technologies, ensuring optimal performance across diverse applications.
-
ATU-130 MAX Radio Automatic Antenna Tuner
Original price was: ₹20,000.00.₹15,200.00Current price is: ₹15,200.00.Add to cartThe ATU-130 MAX is an automatic antenna tuner designed for HF radios, providing efficient impedance matching across a frequency range of 1.6 to 30 MHz. Capable of handling up to 125 watts, it ensures optimal signal transmission and reception. Its fast tuning response and memory function allow for quick adjustments, improving communication quality. The unit is housed in a rugged, weatherproof enclosure, making it suitable for outdoor use. Compact and reliable, the ATU-130 MAX easily integrates with various antenna types, making it ideal for both mobile and base station setups.
-
Flat Omni Antenna 3dBi
Original price was: ₹288.00.₹240.00Current price is: ₹240.00. -
LPDA antenna 12dBi 698-2700MHz
Original price was: ₹1,600.00.₹1,280.00Current price is: ₹1,280.00.Add to cartFrequency – 698 – 960 / 1710 – 2700 MHz, Gain- 10~12dbi, VSWR- ≤ 2.0, Polarization- Vertical, Material- plastic, Storage- Channel 10kM…..
-
Magnetic Base Antenna 6dBi 800-2500Mhz 3 Mtr
Original price was: ₹416.00.₹376.00Current price is: ₹376.00.Add to cartMagnetic Base Antenna 6dBi 800-2500Mhz 3 Mtr | The Magnetic Base Antenna 6dBi 800-2500MHz with 3 Mtr Cable is a high-performance antenna designed for enhancing signal reception across GSM, CDMA, and LTE networks. With a 6dBi gain, it offers significant improvements in connectivity. The magnetic base allows for easy installation on metal surfaces, while the 3-meter cable provides flexibility in positioning the antenna for optimal performance. Ideal for mobile communication, IoT systems, and other applications, this antenna ensures stable and efficient wireless communication in areas with weak signals. |
-
MIMO ANTENNA PATCH 7/9DBI 698-2700Mhz
Original price was: ₹2,400.00.₹1,920.00Current price is: ₹1,920.00.Add to cartThe MIMO antenna patch with 7/9 dBi gain operates within the frequency range of 698-2700 MHz, making it suitable for a wide range of applications including cellular networks, LTE, 4G, and potentially 5G frequencies.
Frequency Range: 698-2700 MHz
Gain: 7 dBi (on lower frequencies) / 9 dBi (on higher frequencies)
Type: MIMO (Multiple Input, Multiple Output) Antenna -
N M RA LMR 400 CRIMP
Original price was: ₹152.00.₹128.00Current price is: ₹128.00.Add to cart| N M RA LMR 400 CRIMP | A crimp connector for LMR 400 cables with RA design, ensuring a strong and dependable electrical connection, crucial for maintaining performance. |
-
Omni Antenna 5G 3DBI 800-2500Mhz
Original price was: ₹560.00.₹400.00Current price is: ₹400.00.Add to cartFrequency – 800 – 2500Mhz Polarization – Vertical VSWR – ?1.8 Gain – 3dbi, MateriaL- Metal, Color- White, Size-8-10ft, Feature- Waterproof, Mounting Type- Wall Mounted……
Torque Wrinch N (M)
Original price was: ₹6,880.00.₹5,760.00Current price is: ₹5,760.00.
| Torque Wrench N (M) | The Torque Wrench N (M) is a precision tool used for applying specific torque to connectors. It ensures that connectors are tightened to the exact specifications, preventing damage and ensuring reliable connections. |
- Adjustable Torque Settings: Allows you to set the desired torque value in Newton-meters. This is essential for applying precise torque to fasteners to avoid over-tightening or under-tightening.
- Accuracy and Calibration: High-quality torque wrenches are calibrated for accuracy to ensure the correct amount of torque is applied. Regular calibration is important for maintaining this accuracy.
- Measurement Units: Besides Newton-meters (Nm), some torque wrenches also offer additional units of measurement like foot-pounds (ft-lb), inch-pounds (in-lb), or kilograms-force meters (kgf·m).
- Display Type:
- Click Type: Provides an audible click when the set torque is reached, signaling that it’s time to stop applying force.
- Beam Type: Shows the torque measurement on a scale, requiring visual verification.
- Digital Type: Features an electronic display with precise torque readings and often includes features like programmable settings and alerts.
- Ergonomic Handle: Designed for comfort and grip, reducing hand fatigue during use.
- Range of Torque: Ensure the torque wrench covers the range of torque values you need for your applications.
Using a Torque Wrench
- Set the Desired Torque:
- Adjust the torque setting to the desired value in Newton-meters. For click-type and digital torque wrenches, this involves turning a dial or using digital controls.
- Apply Torque:
- Attach the Wrench: Place the wrench on the fastener.
- Tighten: Apply steady pressure to the handle until the wrench indicates that the set torque value has been reached (through a click or digital readout).
- Check the Connection:
- Ensure that the fastener is tightened to the specified torque. Recheck if necessary to confirm accuracy.
Recommended Torque Wrenches in Newton-Meters (Nm)
- Click Type Wrenches:
- Tekton 24335 1/2-Inch Drive Click Torque Wrench: Known for its accuracy and durability, offering settings in Newton-meters.
- GearWrench 85077 1/2-Inch Drive Click Torque Wrench: Provides precise torque settings and an audible click for reliable results.
- Digital Torque Wrenches:
- EPAuto 1/2-Inch Drive Click Torque Wrench: Digital display with settings in Newton-meters and additional features like a programmable alarm.
- Franklin Sports 1/2-Inch Drive Digital Torque Wrench: Offers precise digital readings and various torque settings including Newton-meters.
- Beam Type Wrenches:
- Precision Instruments 1/2-Inch Drive Beam Torque Wrench: Provides visual torque readings in Newton-meters and is known for its reliability and durability.
Tips for Using a Torque Wrench
- Calibration: Regularly calibrate your torque wrench to ensure accuracy. Follow the manufacturer’s instructions for calibration.
- Proper Handling: Use the torque wrench according to the manufacturer’s guidelines to avoid damaging the tool or over-tightening fasteners.
- Maintenance: Keep the tool clean and store it properly, ideally in a protective case, to prolong its lifespan.
Applications
- Automotive Repairs: Ensuring proper torque on engine components and wheel lug nuts.
- Mechanical Engineering: Applying precise torque in machinery and structural components.
- Construction: Ensuring accurate tightening of bolts and fasteners in construction projects.
| Brand | RF CONNECTOR HOUSE |
|---|---|
| Application | Coaxial Connector Wrench / Spanner |
Related products
-
LMR 400 CRIMPING TOOL
Original price was: ₹2,080.00.₹1,720.00Current price is: ₹1,720.00.Add to cart| LMR 400 CRIMPING TOOL | The LMR 400 Crimping Tool is tailored for crimping LMR 400 cables, offering a hex die for accurate crimping. It is built with a ratcheting mechanism for consistent results, making it suitable for use with various 400-type cables. |
-
BT 3002 / RG 316 TOOL
Original price was: ₹2,080.00.₹1,720.00Current price is: ₹1,720.00.Add to cart| BT 3002 / RG 316 TOOL | This tool is compatible with BT 3002 and RG 316 cables, providing secure and accurate crimping for connectors. Its design ensures ease of use and long-lasting performance, making it an essential tool for cable preparation. |
-
MC4 ST CRIMPING TOOL
Original price was: ₹1,840.00.₹1,520.00Current price is: ₹1,520.00.Add to cart| MC4 ST CRIMPING TOOL | The MC4 ST Crimping Tool is designed for standard crimping of MC4 connectors. It offers precision, durability, and ease of use, ensuring consistent performance in solar panel and electrical installations. |
-
Torque Wrinch SMA(M)
Original price was: ₹6,880.00.₹5,760.00Current price is: ₹5,760.00.Add to cart| Torque Wrench SMA(M) | This tool is designed for applying precise torque to SMA connectors. It ensures that the connectors are securely fastened without over-tightening, which is crucial for maintaining signal integrity in high-frequency applications. |
-
MC4 WRINCH / SPANER SET
Original price was: ₹320.00.₹280.00Current price is: ₹280.00.Add to cart| MC4 WRENCH / SPANNER SET | The MC4 Wrench / Spanner Set is essential for tightening and loosening MC4 connectors. The set provides a secure grip and ease of use, ensuring proper installation and maintenance of solar panel connections. |
-
Universal Stripping Tool
Original price was: ₹1,920.00.₹1,600.00Current price is: ₹1,600.00.Add to cart| Universal Stripping Tool | The Universal Stripping Tool is versatile, designed to strip various types of cables with ease. It offers adjustable settings to accommodate different cable sizes, ensuring accurate and clean stripping for various applications. |
-
1/2″ LDF CUTTING TOOL
Original price was: ₹11,520.00.₹9,600.00Current price is: ₹9,600.00.Add to cart| 1/2″ LDF CUTTING TOOL | This tool is designed for cutting 1/2″ LDF cables efficiently. It features a hardened steel blade that ensures clean cuts without damaging the cable structure. It is durable, easy to use, and compact for convenient handling. |
-
MC4 RA CRIMPING TOOL
Original price was: ₹4,160.00.₹3,440.00Current price is: ₹3,440.00.Add to cart| MC4 RA CRIMPING TOOL | The MC4 RA Crimping Tool is specifically for right-angle crimping of MC4 connectors. It ensures secure and precise crimps, ideal for solar panel installations and other applications requiring MC4 connectors. |
-
KRONE TOOL
Original price was: ₹400.00.₹360.00Current price is: ₹360.00.Add to cart| KRONE TOOL | The Krone Tool is essential for terminating wires in a Krone IDC block. It is durable, easy to handle, and designed to deliver consistent performance in wire termination tasks, ensuring secure connections. |
-
7/8″ CUTTING TOOL
Original price was: ₹11,520.00.₹9,600.00Current price is: ₹9,600.00.Add to cart| 7/8″ CUTTING TOOL | Crafted for precision cutting of 7/8″ cables, this tool features high-grade steel blades for smooth, accurate cuts. It is suitable for various environments and offers ergonomic design for comfortable use, reducing operator fatigue. |
-
LMR 200/300 / RG-58 CRIMPING TOOL 6
Original price was: ₹1,840.00.₹1,520.00Current price is: ₹1,520.00.Add to cart| LMR 200/300 / RG-58 CRIMPING TOOL | Designed for crimping LMR 200/300 and RG-58 cables, this tool features a hardened steel die set for precision. It is easy to use, with a ratcheting mechanism that ensures quality crimps, making it ideal for professional applications. |
-
Coaxial and DC Cable CUTTING TOOL
Original price was: ₹1,040.00.₹880.00Current price is: ₹880.00.Add to cart| Coaxial and DC Cable CUTTING TOOL | This tool is versatile, designed for cutting a wide range of coaxial and DC cables. It features precise crimping die sets and an ergonomic design that reduces effort, ensuring high-quality cuts with minimal operator strain. |
-
RJ 45 CRIMPING TOOL
Original price was: ₹480.00.₹400.00Current price is: ₹400.00.Add to cart| RJ 45 CRIMPING TOOL | Designed for crimping RJ 45 connectors, this tool features a combination of crimping, stripping, and cutting functions. It is durable and provides accurate, consistent crimps for Ethernet cable installations. |
-
LMR 400 RA CRIMPING TOOL
Original price was: ₹4,160.00.₹3,440.00Current price is: ₹3,440.00.Add to cart| LMR 400 RA CRIMPING TOOL | Similar to the LMR 400 Crimping Tool, the RA variant is designed for right-angle applications. It provides the same precision and reliability, ensuring secure crimps in challenging cable installations. |
-
7/8” ALUMININUM CUTTING TOOL
Original price was: ₹12,640.00.₹10,560.00Current price is: ₹10,560.00.Add to cart| 7/8” ALUMINUM CUTTING TOOL | The 7/8” Aluminum Cutting Tool is specifically designed for cutting aluminum cables with precision. It features sharp blades and a sturdy build, making it reliable for both professional and fieldwork applications. |
-
MC4 STRIPING TOOL
Original price was: ₹960.00.₹760.00Current price is: ₹760.00.Add to cart| MC4 STRIPPING TOOL | This tool is used for stripping cables in MC4 connector installations. It is designed to strip cables of various sizes accurately, ensuring a clean and precise preparation for crimping and connecting. |
Reviews
There are no reviews yet.