-
SMA M RA LMR 400 CRIMP
Original price was: ₹216.00.₹184.00Current price is: ₹184.00.Add to cartThis SMA male right-angle connector is designed for crimping onto LMR 400 cables. It ensures a secure and stable connection for high-frequency signal transmission, suitable for RF applications with space constraints.
-
Flat Omni Antenna 3dBi
Original price was: ₹288.00.₹240.00Current price is: ₹240.00. -
DIN F 1/2″ LDF CLAMP
Original price was: ₹280.00.₹232.00Current price is: ₹232.00.Add to cartImpedance – 50Ω, Frequency – 6.5Ghz, VSWR – 1.15:1 (Max), Dielectric Resistance – ≥5000MΩ,country of origin-Made in India, packaging Type- Box, Colour-Silver, Usage- Connector Cable and Microwave Parts..
-
SMA M LMR 100 CRIMP
Original price was: ₹32.00.₹25.60Current price is: ₹25.60.Add to cartThis SMA male connector is designed for crimping onto LMR 100 cables. It ensures a secure and stable connection for high-frequency signal transmission, ideal for telecommunications and other professional RF applications.
-
Whip Antenna RA Mov 5dBi 868Mhz
Original price was: ₹160.00.₹144.00Current price is: ₹144.00.Add to cartWhip Antenna RA Mov 5dBi 868Mhz | The Whip Antenna RA Mov 5dBi 868MHz is specifically designed for enhancing signal reception in the 868MHz frequency band, commonly used in IoT and industrial applications. With a 5dBi gain, it provides improved connectivity and signal strength. The movable right-angle design allows for flexible positioning and easy installation, making it ideal for use in remote monitoring systems, smart meters, and other IoT devices. This antenna ensures reliable and consistent performance, making it perfect for applications requiring robust wireless communication in the 868MHz band. |
-
18dBi Yagi Antenna 800-2500MHz 10 Mtr Wire
Original price was: ₹2,400.00.₹1,920.00Current price is: ₹1,920.00.Add to cart| **18dBi Yagi Antenna 800-2500MHz 10 Mtr Wire** | This Yagi antenna, offering 18dBi gain, covers the 800-2500MHz frequency range. It has vertical polarization, 50Ω impedance, and a VSWR of ≤ 1.5. The antenna is equipped with a 10-meter RG-58 cable and an N Female connector, ensuring high performance over long distances. ROHS compliant, it’s ideal for demanding applications requiring extended reach. |
-
Cold Shrink Tube for AISG/Jumper Cables
Original price was: ₹216.00.₹176.00Current price is: ₹176.00.Add to cartThe Cold Shrink Tube by RF CONNECTOR HOUSE is made from high-quality silicon rubber, offering superior insulation and protection for cables. With a 2:1 shrink ratio, it provides a secure fit around cables without the need for heat during installation. Rated for 220V and capable of withstanding temperatures from -55°C to +120°C, this tube offers durable protection against environmental factors like moisture, dust, and abrasion. Customizable in diameter, length, and thickness, it is ideal for cable repairs, insulation protection, and electrical applications in industrial, commercial, and residential environments.
-
Rubber mastic Tape
Original price was: ₹240.00.₹200.00Current price is: ₹200.00.Add to cartThe Rubber Mastic Tape by RF CONNECTOR HOUSE is a high-performance, double-sided waterproof tape designed for sealing and insulating electronic components. Featuring a pressure-sensitive hot melt adhesive, it delivers strong bonding to steel, PVC, and other surfaces. With exceptional tensile strength (2400 psi), elongation (500%), and tear resistance (200 pli), this tape is flame-retardant and withstands high temperatures, ensuring reliable performance in harsh environments. Ideal for industrial and electrical applications, it provides superior protection against water, dust, and mechanical stress. Customizable in thickness and dimensions, this versatile tape meets diverse insulation and sealing needs.
-
3 dBi WIFI internal antenna 2.4/5.8 GHz with 10 cm cable
Original price was: ₹80.00.₹40.00Current price is: ₹40.00.Add to cartThe 3 dBi WiFi Internal Antenna with a 10 cm cable is designed for 2.4/5.8 GHz wireless applications, providing reliable and strong connectivity for devices such as routers, IoT systems, smart home devices, and wireless access points. With a 3 dBi gain, it ensures improved signal strength and extended coverage for seamless performance. The compact design, combined with a 10 cm cable, makes it ideal for integration into space-constrained devices. This antenna is perfect for enhancing WiFi communication in a wide range of applications, including consumer electronics, industrial systems, and IoT networks, offering reliable and stable wireless connectivity.
-
3dBi internal WIFI Antenna 2.4/5.8GHz
Original price was: ₹96.00.₹56.00Current price is: ₹56.00. -
3 dBi PCB Antenna 2.4 GHz
Original price was: ₹80.00.₹40.00Current price is: ₹40.00.Add to cartThe 3 dBi PCB Antenna is designed for 2.4 GHz applications, offering reliable performance for IoT, wireless connectivity, GPS, and navigation systems. Ideal for remote control, automation, and wireless medical devices, it ensures stable signal transmission and reception. Its compact PCB design is perfect for space-constrained applications, while its high efficiency enhances device connectivity. This antenna is an excellent choice for modern wireless technologies, ensuring optimal performance across diverse applications.
-
ATU-130 MAX Radio Automatic Antenna Tuner
Original price was: ₹20,000.00.₹15,200.00Current price is: ₹15,200.00.Add to cartThe ATU-130 MAX is an automatic antenna tuner designed for HF radios, providing efficient impedance matching across a frequency range of 1.6 to 30 MHz. Capable of handling up to 125 watts, it ensures optimal signal transmission and reception. Its fast tuning response and memory function allow for quick adjustments, improving communication quality. The unit is housed in a rugged, weatherproof enclosure, making it suitable for outdoor use. Compact and reliable, the ATU-130 MAX easily integrates with various antenna types, making it ideal for both mobile and base station setups.
-
Flat Omni Antenna 3dBi
Original price was: ₹288.00.₹240.00Current price is: ₹240.00. -
LPDA antenna 12dBi 698-2700MHz
Original price was: ₹1,600.00.₹1,280.00Current price is: ₹1,280.00.Add to cartFrequency – 698 – 960 / 1710 – 2700 MHz, Gain- 10~12dbi, VSWR- ≤ 2.0, Polarization- Vertical, Material- plastic, Storage- Channel 10kM…..
-
Magnetic Base Antenna 6dBi 800-2500Mhz 3 Mtr
Original price was: ₹416.00.₹376.00Current price is: ₹376.00.Add to cartMagnetic Base Antenna 6dBi 800-2500Mhz 3 Mtr | The Magnetic Base Antenna 6dBi 800-2500MHz with 3 Mtr Cable is a high-performance antenna designed for enhancing signal reception across GSM, CDMA, and LTE networks. With a 6dBi gain, it offers significant improvements in connectivity. The magnetic base allows for easy installation on metal surfaces, while the 3-meter cable provides flexibility in positioning the antenna for optimal performance. Ideal for mobile communication, IoT systems, and other applications, this antenna ensures stable and efficient wireless communication in areas with weak signals. |
-
MIMO ANTENNA PATCH 7/9DBI 698-2700Mhz
Original price was: ₹2,400.00.₹1,920.00Current price is: ₹1,920.00.Add to cartThe MIMO antenna patch with 7/9 dBi gain operates within the frequency range of 698-2700 MHz, making it suitable for a wide range of applications including cellular networks, LTE, 4G, and potentially 5G frequencies.
Frequency Range: 698-2700 MHz
Gain: 7 dBi (on lower frequencies) / 9 dBi (on higher frequencies)
Type: MIMO (Multiple Input, Multiple Output) Antenna -
N M RA LMR 400 CRIMP
Original price was: ₹152.00.₹128.00Current price is: ₹128.00.Add to cart| N M RA LMR 400 CRIMP | A crimp connector for LMR 400 cables with RA design, ensuring a strong and dependable electrical connection, crucial for maintaining performance. |
-
Omni Antenna 5G 3DBI 800-2500Mhz
Original price was: ₹560.00.₹400.00Current price is: ₹400.00.Add to cartFrequency – 800 – 2500Mhz Polarization – Vertical VSWR – ?1.8 Gain – 3dbi, MateriaL- Metal, Color- White, Size-8-10ft, Feature- Waterproof, Mounting Type- Wall Mounted……
N F BH LMR 100 CLAMP
Original price was: ₹192.00.₹160.00Current price is: ₹160.00.
| N F BH LMR 100 CLAMP | A clamp for LMR 100 cables with a built-in handle, providing secure attachment and minimizing cable movement for reliable performance. |
N F: Represents the manufacturer’s name or a specific product line. It could be a part of a model number or catalog code used by the manufacturer.
BH: This could indicate a specific series, design, or feature of the clamp. For example, “BH” might refer to a particular type or style of the clamp, though the exact meaning may vary depending on the manufacturer.
LMR 100: Refers to a specific type of coaxial cable. LMR 100 is a type of low-loss coaxial cable used in various RF (radio frequency) and communication applications, known for its flexibility and good signal performance.
CLAMP: Indicates that the product is a clamp used to secure or hold the cable in place.
Purpose of the LMR 100 Clamp:
Securing Cables: The clamp is designed to fasten LMR 100 coaxial cables to a mounting surface or within a cable management system. This helps ensure that the cables are held securely and positioned correctly.
Preventing Movement: By securing the cable, the clamp helps prevent it from shifting or moving, which can help avoid damage and maintain the optimal performance of the cable.
Cable Management: The clamp assists in organizing cables in installations, reducing the risk of tangling, and ensuring a neat and efficient setup.
Typical Uses:
RF and Communication Systems: LMR 100 cables are used in RF systems due to their low attenuation and flexibility. The clamp helps ensure that these cables are securely mounted, which is crucial for maintaining signal integrity.
Broadcasting and Telecommunications: Properly securing cables in broadcasting and telecom setups is essential for reliable signal transmission and system stability.
Networking and Data Transmission: In high-frequency networking environments, the clamp helps maintain organized and reliable connections.
Installation Tips:
Preparation:
Clean the Mounting Surface: Make sure the surface where the clamp will be installed is clean and free of debris to ensure a secure fit.
Positioning:
Place the Clamp: Position the clamp around the LMR 100 cable at the desired location. Ensure it is properly aligned with the cable.
Securing:
Fasten the Clamp: Use screws, bolts, or other fastening methods as specified by the manufacturer to secure the clamp. Ensure it is tight enough to hold the cable firmly but not so tight as to damage the cable.
Inspection:
Check the Installation: After installation, inspect the clamp to ensure it holds the cable securely and that there is no movement or strain on the cable. Ensure that the cable is not pinched or damaged.
| Brand | RF CONNECTOR HOUSE |
|---|---|
| Material | Metal |
| Finish | Polished |
| Impedance | 50Ω |
| Frequency | 6Ghz |
| VSWR | 1.15:1 (Max) |
| Dielectric Resistance | ≥5000MΩ |
| Contact Resistance | Center Contact ≤3mΩ Outer Contact ≤2.5mΩ |
| Operating Temperature | -40℃～+85℃ |
| Usage | Industrial |
Related products
-
N F 4 HOLE RG 141 SOLDER
Original price was: ₹184.00.₹152.00Current price is: ₹152.00.Add to cart| N F 4 HOLE RG 141 SOLDER | A four-hole solder connector for RG 141 cables, designed to provide a stable and reliable electrical connection with minimal signal loss. |
-
N M 3/8″ LDF CLAMP
Original price was: ₹480.00.₹400.00Current price is: ₹400.00.Add to cart| N M 3/8″ LDF CLAMP | A clamp for 3/8″ Low-Density Foam (LDF) cables, providing a secure hold and stable support to maintain cable alignment and prevent shifting. |
-
N M LMR 300 CRIMP
Original price was: ₹104.00.₹80.00Current price is: ₹80.00.Add to cart| N M LMR 300 CRIMP | A crimp connector for LMR 300 cables, ensuring a reliable and stable electrical connection, crucial for high-performance applications. |
-
N M RA 1/2″ SF CLAMP
Original price was: ₹352.00.₹288.00Current price is: ₹288.00.Add to cart| N M RA 1/2″ SF CLAMP | A clamp for 1/2″ Semi-Flexible (SF) cables with RA design, providing secure support and stability while accommodating cable flexibility. |
-
N M LMR 300 CLAMP
Original price was: ₹152.00.₹128.00Current price is: ₹128.00.Add to cart| N M LMR 300 CLAMP | A clamp designed for LMR 300 cables, offering secure attachment and stability to prevent movement and ensure reliable cable management. |
-
N M 7/8″ CLAMP
Original price was: ₹280.00.₹232.00Current price is: ₹232.00.Add to cart| N M 7/8″ CLAMP | A clamp for 7/8″ cables, providing secure attachment and preventing movement. It ensures stable cable management in various installations. |
-
N M RA 1/2″ LDF CLAMP
Original price was: ₹352.00.₹288.00Current price is: ₹288.00.Add to cart| N M RA 1/2″ LDF CLAMP | A clamp for 1/2″ Low-Density Foam (LDF) cables with RA design, providing secure attachment and stability to prevent movement and ensure proper alignment. |
-
N M LMR 240 CLAMP
Original price was: ₹184.00.₹152.00Current price is: ₹152.00.Add to cart| N M LMR 240 CLAMP | A clamp for LMR 240 cables, offering secure attachment and stability, preventing shifting and maintaining proper alignment. |
-
N F 4 HOLE 25MM SOLDER
Original price was: ₹176.00.₹144.00Current price is: ₹144.00.Add to cart| N F 4 HOLE 25MM SOLDER | A four-hole solder connector for 25mm diameter cables, providing a robust connection crucial for stable performance and minimal signal loss. |
-
N F 4 HOLE LMR 200 CRIMP
Original price was: ₹160.00.₹136.00Current price is: ₹136.00.Add to cart| N F 4 HOLE LMR 200 CRIMP | A crimp connector for LMR 200 cables with four holes, ensuring a dependable and strong electrical connection essential for high-performance applications. |
-
N F 4 HOLE 17.5MM SOLDER
Original price was: ₹160.00.₹128.00Current price is: ₹128.00.Add to cart| N F 4 HOLE 17.5MM SOLDER | A four-hole solder connector for 17.5mm diameter cables, designed for a secure and stable electrical connection with minimal signal loss. |
-
N F 1/2″ SF CLAMP
Original price was: ₹216.00.₹158.40Current price is: ₹158.40.Add to cartProduct Type- SF CLAMP, Material- Metal, Usage- Industrial, Finish- Polished, Size- Different , Impedance – 50Ω,Frequency – 6Ghz, VSWR – 1.15:1 (Max), Dielectric Resistance – ≥5000MΩ
-
N F 1/2″ LDF SOLDER
Original price was: ₹112.00.₹88.00Current price is: ₹88.00.Add to cartImpedance – 50Ω, Frequency – 6Ghz, VSWR – 1.15:1 (Max), Dielectric Resistance – ≥5000MΩ, 10000 Piece Per Day
-
N M 1/2″ SF CLAMP
Original price was: ₹160.00.₹136.00Current price is: ₹136.00.Add to cart| N M 1/2″ SF CLAMP | A clamp for 1/2″ Semi-Flexible (SF) cables, offering secure support while allowing flexibility. It ensures stable cable management and prevents movement. |
-
N F RA LMR 240 CLAMP
Original price was: ₹216.00.₹176.00Current price is: ₹176.00.Add to cart| N F RA LMR 240 CLAMP | A clamp for LMR 240 cables with RA design, providing secure attachment and stability to prevent shifting and maintain proper alignment. |
-
N M 7/8 AL CLAMP
Original price was: ₹1,280.00.₹1,040.00Current price is: ₹1,040.00.Add to cart| N M 7/8 AL CLAMP | A clamp for 7/8″ aluminum cables, ensuring secure attachment and stability, ideal for managing aluminum cables in different applications. |
-
N F BH RA LMR 200 SOLDER
Original price was: ₹232.00.₹192.00Current price is: ₹192.00.Add to cart| N F BH RA LMR 200 SOLDER | A solder connector for LMR 200 cables with a built-in handle, designed for a robust and dependable electrical connection with minimal signal loss. |
-
N F 7/8″ CLAMP
Original price was: ₹280.00.₹232.00Current price is: ₹232.00.Add to cart| N F 7/8″ CLAMP | A clamp designed for 7/8″ cables, offering secure attachment and stability to prevent movement and ensure proper cable management in various installations. |
-
N F BH LMR 200 CRIMP
Original price was: ₹184.00.₹152.00Current price is: ₹152.00.Add to cart| N F BH LMR 200 CRIMP | A crimp connector for LMR 200 cables with a built-in handle, offering a reliable and stable electrical connection crucial for high-performance applications. |
-
N F LMR 200 CRIMP
Original price was: ₹72.00.₹56.00Current price is: ₹56.00.Add to cart| N F LMR 200 CRIMP | A crimp connector for LMR 200 cables, providing a secure and stable electrical connection necessary for maintaining signal integrity and performance. |
-
N F 4 HOLE RG 86 SOLDER
Original price was: ₹184.00.₹152.00Current price is: ₹152.00.Add to cart| N F 4 HOLE RG 86 SOLDER | A four-hole solder connector for RG 86 cables, ensuring a secure and strong electrical connection essential for maintaining signal quality. |
-
N F 1/4″ SF CLAMP
Original price was: ₹176.00.₹144.00Current price is: ₹144.00.Add to cart| N F 1/4″ SF CLAMP | A clamp designed for 1/4″ Semi-Flexible (SF) cables, ensuring reliable attachment and stability while allowing some flexibility for dynamic applications. |
-
N F 4 HOLE 19MM SOLDER
Original price was: ₹160.00.₹128.00Current price is: ₹128.00.Add to cart| N F 4 HOLE 19MM SOLDER | A four-hole solder connector for 19mm diameter cables, ensuring a strong and reliable electrical connection essential for maintaining performance. |
-
N F 3/8″ LDF CLAMP
Original price was: ₹240.00.₹192.00Current price is: ₹192.00.Add to cart| N F 3/8″ LDF CLAMP | A clamp for 3/8″ Low-Density Foam (LDF) cables, offering secure attachment and stable support to prevent shifting and ensure proper alignment. |
-
N M 1-5/8″ LDF CLAMP
Original price was: ₹2,320.00.₹1,920.00Current price is: ₹1,920.00.Add to cart| N M 1-5/8″ LDF CLAMP | A clamp designed for 1-5/8″ Low-Density Foam (LDF) cables, offering secure attachment and stability to prevent movement and ensure proper cable management. |
-
N M RA 1/2″ LDF SOLDER
Original price was: ₹192.00.₹160.00Current price is: ₹160.00.Add to cart| N M RA 1/2″ LDF SOLDER | A solder connector for 1/2″ Low-Density Foam (LDF) cables with RA design, ensuring a durable and reliable electrical connection with minimal signal loss. |
-
N M LMR 200 CLAMP
Original price was: ₹184.00.₹152.00Current price is: ₹152.00.Add to cart| N M LMR 200 CLAMP | A clamp for LMR 200 cables, providing secure attachment and stability, preventing movement and ensuring proper cable management. |
-
N M LMR 200 CRIMP
Original price was: ₹88.00.₹72.00Current price is: ₹72.00.Add to cart| N M LMR 200 CRIMP | A crimp connector for LMR 200 cables, delivering a reliable and stable electrical connection crucial for high-performance applications. |
-
N M 1/4″ SF CLAMP
Original price was: ₹160.00.₹136.00Current price is: ₹136.00.Add to cart| N M 1/4″ SF CLAMP | Designed for 1/4″ Semi-Flexible (SF) cables, this clamp provides reliable attachment and stability while allowing flexibility for dynamic applications. |
-
N M 4 HOLE SOLDER
Original price was: ₹152.00.₹128.00Current price is: ₹128.00.Add to cart| N M 4 HOLE SOLDER | A four-hole solder connector for various cable sizes, designed to provide a secure and stable electrical connection, ensuring consistent signal transmission. |
Reviews
There are no reviews yet.